How to Stay Warm on the Job This Winter With FR Clothing That Works
Winter brings enough challenges. Your FR gear shouldn’t be one of them.
When the temperature drops, you need workwear that keeps you warm without turning you into a stiff, bulky statue. You also need to stay compliant and protected while still being able to move, bend, reach, and get the job done.
The best cold-weather setup is simple: warmth where it matters, flexibility where it counts, and dependable FR protection all the way through.
This season, three LAPCO FR pieces work together as a solid winter system:
- FR Insulated Parka with Windshield® Technology (Gray)
- FR Insulated Bib with Windshield® Technology (Navy)
- FR Hoodie Sweatshirt – 12 oz. 95/5 Fleece (Black)
Together, they help solve the usual winter problems: cold wind, moisture, temperature swings, and layers that fight your movement instead of helping it.
1. FR Insulated Parka with Windshield® Technology (Gray)
Outer layer protection for cold, windy days
If you’re looking for a warm FR winter jacket that actually feels work-ready, this parka is built for rough weather and long days outside.
Main benefits
- Windshield® 9 oz. FR cotton duck outer shell with PU laminate to help repel water and block wind.
- 14 oz. quilted FR lining for serious warmth without going overboard on bulk.
- FR fleece-lined stand-up collar for extra comfort and coverage around your neck.
- Bi-swing back to give you more freedom to move your arms and shoulders.
- Longer length that hits at the top of the thigh for added coverage in the cold.
- Triple-needle stitching and Nomex® thread for durability and toughness.
- Heavy-duty brass zipper with Nomex® tape and covered snaps designed with FR protection in mind.
FR protection
- CATEGORY (CAT) 4
- ATPV 43 cal/cm²
- NFPA 70E compliant
- NFPA 2112 certified
2. FR Insulated Bib with Windshield® Technology (Navy)
Lower-body warmth with room to move
Good winter bibs are about more than just staying warm. You still have to climb, crouch, walk, and work. These FR insulated bibs are made to keep the cold out without locking you up.
Main benefits
- Windshield® FR outer shell that helps block wind and repel water.
- FR quilted lining that holds onto warmth through long shifts.
- Smooth FR cotton interior for next-to-skin comfort and better moisture management.
- Reinforced construction that’s built to handle frequent wear in cold seasons.
- Designed for movement so you can bend, climb, and move without fighting your gear.
- Nomex® thread and durable hardware to add strength where you need it most.
FR protection
- CATEGORY (CAT) 4
- ATPV 43 cal/cm²
- NFPA 70E compliant
- NFPA 2112 certified
3. FR Hoodie Sweatshirt – 12 oz. 95/5 Fleece (Black)
Warm, flexible mid layer for everyday comfort
This FR hoodie is the kind of piece you’ll reach for again and again. It’s not a base layer. It’s a mid layer designed to add warmth and comfort without locking down your movement.
Main benefits
- Heavyweight 12.5 oz. FR fleece that helps keep you warm in cold conditions.
- 95% cotton / 5% spandex blend for a soft feel with a bit of stretch.
- Attached hood with drawstring for quick extra coverage when the wind kicks up.
- Roomy front pouch pocket for hands or small essentials.
- Ribbed cuffs and flexible waistband that help keep the hoodie in place and hold its shape.
- Sewn with Nomex® thread for added durability.
FR protection
- CATEGORY (CAT) 2
- ATPV 17 cal/cm²
- NFPA 70E compliant
- NFPA 2112 certified
How to Layer Your FR Gear for Winter
When you’re dealing with cold, wind, and changing conditions, layering makes a big difference. Here’s a simple way to build an FR winter system around these three pieces.
Mid layer: FR Hoodie
Wear the FR hoodie over your FR base layer. It adds warmth through the body and arms while still letting you move comfortably. It’s the piece you’ll probably keep on all day.
Insulated layer: FR Bibs
Pull on the FR insulated bibs for serious lower-body warmth. They help block wind and hold in heat through your core and legs, which matters a lot when you’re outdoors for long stretches.
Outer layer: FR Insulated Parka
Finish with the FR Insulated Parka as your outer shell. It helps protect you from wind, light moisture, and colder temperatures, while the bi-swing back and design details are there to support movement, not get in the way of it.
Quick Comparison
| Product | Layer Type | Best For | Warmth | Mobility | Wind / Water Defense | FR Category |
|---|---|---|---|---|---|---|
| FR Insulated Parka | Outer layer | Cold, windy conditions | Very high | High | Yes | CAT 4 |
| FR Insulated Bibs | Insulated layer | Full-day core and leg warmth | Very high | High | Yes | CAT 4 |
| FR Hoodie Sweatshirt | Mid layer | Comfort and flexibility | Medium | Very high | No | CAT 2 |
Winter Doesn’t Have to Slow You Down
Cold weather is tough enough on its own. The right FR gear can make your days a lot more manageable.
This simple system gives you:
- Warmth without piling on bulky layers
- Mobility so you can actually move and work
- Durable construction that stands up to real use
- FR protection you can count on
Build your winter setup now so you’re ready when the temperature drops.